*******************************************************************************
DCL56 BIOS Release Notes                                             05/21/2004

*Version   : V1.30.00
*File name : CL56130B.ROM (V1.30.00) [for M11P VGA]
*Checksum  : AC80

Fixed/Modification:
	SYS:
            1.Change "System BIOS Version" Name in BIOS setting screen
            2.Change the Version string in POST screen

	EC:
 Modified:
            1.If full condition of battery from SMBus is set but voltage from
	       SMBus is <=16.2V, EC will recharge battery 1 hr.
	    2.Modify JP keyboard matrix.
	    3.Modify P1&P2 buttons behavior.
	      It will always send scan code if pressing P1 or P2 button.
 Add function:

*******************************************************************************
DCL56 BIOS Release Notes                                             05/13/2004

*Version   : V1.28.00
*File name : CL56128B.ROM (V1.28.00) [for M11P VGA]
*Checksum  : 3C25

Fixed/Modification:
	SYS:
            1.Fix Suse Linux CD can't boot.

	EC:
 Modified:
 Add function:

*******************************************************************************
DCL56 BIOS Release Notes                                             05/07/2004

*Version   : V1.26.00
*File name : CL56126B.ROM (V1.26.00) [for M11P VGA]
*Checksum  : 3F5C

Fixed/Modification:
	SYS:
            1.Updata Dothan B1 Stepping CPU processor VID Table.
            2.Add Function Int15 (AX=9610H,BL=16H).
	EC:
 Modified:
 	    1.Disable AdaptorErrBeep function.

 Add function:

*******************************************************************************
DCL56 BIOS Release Notes                                             04/28/2004

*Version   : V1.25.00
*File name : CL56125B.ROM (V1.25.00) [for M11P VGA]
*Checksum  : 930B

Fixed/Modification:
	SYS:

   Base on :
             Base on DCL562 V1.20.00.
   Modified:
             1.ADD Function INT15,AX=9610h,BL=12H.
             2.ADD Function INT15,AX=9610h,BL=18H.
             3.Updata microcode for Celeron M CPU.
             4.Add WLAN ID into Bios (VID=17FE;DID=2120;SVID=17FE;SSID=2120).
             5.Update for Dothan CPU B1 stepping.

	EC:
             The same as V1.20
*******************************************************************************
DCL56 BIOS Release Notes                                             03/26/2004

*Version   : V1.20.00
*File name : CL56120B.ROM (V1.20.00) [for M11P VGA]
*Checksum  : B987

Fixed/Modification:
	SYS:

	EC:
Fixed:
Known issue:
Modified:
	1.Do not power on system until power off system more than 300ms.
	2.Modify battery protection function.
Add function:

*******************************************************************************
DCL56 BIOS Release Notes                                             03/09/2004

*Version   : V1.10.00
*File name : CL56110B.ROM (V1.10.00) [for M11P VGA]
*Checksum  : D7B6

Fixed/Modification:
	SYS:
	1. Fix: Some characters can't key in security field of setup menu.


	EC:
Fixed:
	1.Issue[C2C003], Sometime the cursor lost function after S4 resume.
Known issue:
Modified:
	1.Modify PS2CFG_INIT value.
	2.Modify battery protection function.
Add function:

*******************************************************************************
DCL56 BIOS Release Notes                                             03/05/2004

*Version   : V1.00.00
*File name : CL56100B.ROM (V1.00.00) [for M11P VGA]
*Checksum  : AA2A

Fixed/Modification:
	SYS:
	1. Modify Quiet Boot help message.
	2. Modify FIR string.


	EC:
	The same as V0.11

*******************************************************************************
DCL56 BIOS Release Notes                                             03/03/2004

*Version   : V0.11.00
*File name : CL56011B.ROM (V0.11.00) [for M11P VGA]
*Checksum  : A1FA
*File name : CL56011C.ROM (V0.11.00) [for M10P VGA]
*Checksum  : A387

Fixed/Modification:
	SYS:
	1. Fix: Some characters can't key in security field of setup menu.
	2. Fix: Thers is no message for F12_Boot_Menu enabled when quiet boot disabled.

	EC:
	The same as V0.10

*******************************************************************************
DCL56 BIOS Release Notes                                             03/02/2004

*Version   : V0.10.00
*File name : CL56010B.ROM (V0.10.00) [for M11P VGA]
*Checksum  : B238
*File name : CL56010C.ROM (V0.10.00) [for M10P VGA]
*Checksum  : B3C5

Fixed/Modification:
	SYS:
	1.Modify Boot sequence.
	2.Modify Fn+F5 hot-key switch displayer.
	3.Modify Boot Menu string.
	4.Modify jump J1 load default.
	5.MOdify Smart battery function.


	EC:
Fixed:
	1.Issue[C1C004], When turn on WLan switch button find off some Wireless can't be work.
	2.Issue[C2C014], The Wireless Lan Status always off on launch manager display.
Known issue:
Modified:
	1.Modify auto dim function.
	2.Modify killswitch on/off scan code.
	3.Modify EEPROM address : turn on ID, shutdown ID and initialized address.
	4.Modify panel's DAC value.
	5.Modify bettery function : abnormal current and communication fail.
Add function:
*******************************************************************************
DCL56 BIOS Release Notes                                             02/24/2004

*Version   : V0.09.00
*File name : CL56009B.ROM (V0.09.00) [for M11P VGA]
*Checksum  : F835
*File name : CL56009C.ROM (V0.09.00) [for M10P VGA]
*Checksum  : F9C2

Fixed/Modification:
	SYS:
	1.Modify bluetooth function.
	2.Modify Fn+F5 hot-key switch displayer.
	3.Modify Bay Swap function.
	4.Fix S3/S4 time out error.

	EC:
Modified:
        1.Move function "CRTProcess" to common code.
        2.Move initial value of EC index mode IO port base address from kernel to oemhooks.h
        3.Move Switch "SW_PUTCHAR" from kernel to oemhooks.h
        4.Move function "LEDControlforAP" to common code.
        5.Move function "ServiceDirectCD" to common code.
        6.Move function "ServiceButton" to common code.
        7.Move function "ServiceResume" to common code.
        8.Move function "BrightnessForAP" to common code.
        9.Move function "NormalDimModeProcess" to common code.
        10.Move function "WakeUpFromLAN" to common code.
        11.Move function "WakeUpFromRTC" to common code.
        12.Move "AnykeyWakeUp" function to COMMON code.
        13.Change switch name to "SW_KeyboardWakeUp_SUPPORT".
        14.Move "LCDPowerSequence" function to COMMON code.
        15.After the KB910Q B4 chip is being powered on,the DPLL is default to be disabled.
	   The fireware should enable the internal DPLL after 3 seconds after power-on.
        16.Pending SCI query during S3 resume 5 second and recover SCI after 5 second.
        17.Sometimes firmware scan code send to Host incompletely.
          Change OEM scan code from Set2 to Set1 and send to KBC.
	18.IKB timeout cause firmware scan code send to Host incompletely.
        19.It is for SM_BUS1 sometime will be lock when plug battery SMB reading tooling
          Due to SMB1 map to SCL1/SDA1 and SCL2/SDA2 in Reg"SMBPIN",just monitor SMB1
	20.The IKB's scan-matrix was enabled too early before the last
	  data byte of make-code or break-code for Hot-Key was sent.
	21.Modify BATT_OVP function.
Add function:
        1.Add function : Clear SCI event when system turn off.
        2.Add "CountIncreaseALW" and "CountIncreaseALW" function to common code.
        3.Add new function "LedDisplay" to common code.
	4. Add new shutdown ID for press power button 4 sec. to shutdown.
        5.Implement Bootblock update solution.
        6.Addl definition "PWRON_BackLight_DebounceTime" and "BackLight_DebounceTime"
          for LCD debounce time.

*******************************************************************************
DCL56 BIOS Release Notes                                             02/17/2004

*Version   : V0.08.00
*File name : CL56008B.ROM (V0.08.00) [for M11P VGA]
*Checksum  : BA6C
*File name : CL56008C.ROM (V0.08.00) [for M10P VGA]
*Checksum  : BBF9

Fixed/Modification:
	SYS:
	1.Modify Bay Swap function.
	2.Modify smart battery function.
	3.Modify boot without memory Beep Sound.

	EC:
	1.Revise scan code when pressing the /key on NumLock mode.
	2.Change the battery low condition capacity from 10% to 15%.

*******************************************************************************
DCL56 BIOS Release Notes                                             02/12/2004

*Version   : V0.07.00
*File name : CL56007B.ROM (V0.07.00) [for M11P VGA]
*Checksum  : F534
*File name : CL56007C.ROM (V0.07.00) [for M10P VGA]
*Checksum  : F6C1

Fixed/Modification:
	SYS:
	1. Update VGA BIOS M10/M11 V0.2 .
	2. Modify HDD lock function.

	EC:
	1.Modify BATT_OVP function.
	2.Modify battery fast charge current.


*******************************************************************************
DCL56 BIOS Release Notes                                             02/10/2004

*Version   : V0.06.00
*File name : CL56006B.ROM (V0.06.00) [for M11P VGA]
*Checksum  : 661C
*File name : CL56006C.ROM (V0.06.00) [for M10P VGA]
*Checksum  : 6A6B

Fixed/Modification:
	SYS:
	1. Update VGA BIOS M10/M11 V0.1.
	2. Fix ASSET TAg not show on setup menu.
	3. Add Bay Swap function.
	4. Modify FIR default setup.
	
	EC:
	Fixed:
	1.Issue[B2C080], System execute P1 key function when Launch Manager
			 set P2 key (Lanuch Manager:V1.07B).
	2.Modify BATT_OVP function.
	3.Modify CD ROM hot plug function.

*******************************************************************************
DCL56 BIOS Release Notes                                             02/06/2004

*Version   : V0.06.T1
*File name : CL56006B.T01 (V0.06.T1) [for M11P VGA]
*Checksum  : 88E9
*File name : CL56006C.T01 (V0.06.T1) [for M10P VGA]
*Checksum  : 777C

Fixed/Modification:
	SYS:
	1. Update Dothan CPU MICRO-CODE & IST table.
	2. Fix CardBus error.
	3. Modify Setup Menu .
	
	EC:
	The same as V0.05.00


*******************************************************************************
DCL56 BIOS Release Notes                                             02/05/2004

*Version   : V0.05.00
*File name : CL56005B.ROM (V0.05.00) [for M11P VGA]
*Checksum  : 075E
*File name : CL56005C.ROM (V0.05.00) [for M10P VGA]
*Checksum  : F5F1

Fixed/Modification:
	SYS:
	1.Modify V-RAM size in Setup menu .
	2.Add suport Win flash.
	3.Fix Intel OSB logo not correct.
	4.Fix LED not correct when system into S1.
	5.Modify HDD Serial Number in Setup Menu.
	6.Modify Serial Number.
	7.Modify UUID.
	8.Update M11P VGA BIOS for EDID panel.

	EC:
	The same as V0.05T1.

*******************************************************************************
DCL56 BIOS Release Notes                                             02/03/2004

*Version   : V0.05.T1
*File name : CL56005B.T01 (V0.05.T1)
*Checksum  : C183
*File name : CL56005C.T01 (V0.05.T1)
*Checksum  : C011

Fixed/Modification:
	SYS:
	1.Modify Acer boot Logo.
	2.Fix Lid switch no function.
	3.Modify boot device sequence.
	4.Fix suspender tool can't auto wake up.
	5.Update VGA BIOS.
	6.Add Acer SLP.
	

	EC:
	1.The sleep key function not reliable when wake up from S3 by any key.
	2.If shut down system and un-plug the AC, then boot system,the brightness
	  will down to last step.

*******************************************************************************
DCL56 BIOS Release Notes                                             01/29/2004

*Version   : V0.04.00
*File name : CL56004B.ROM (V0.04.00)
*Checksum  : 61DA
*File name : CL56004C.ROM (V0.04.00)
*Checksum  : 630C

Fixed/Modification:
	SYS:
	1.Modify BIOS setup menu.
	2.Modify Boot LOGO.
	3.Implement PNP ID into BIOS.
	4.Fix LCD auto Dim issue.
	5.FIx Toppoly 14.1" XGA panel abnormal dispaly.


	EC:
	1.Modify thermal trip point.
*******************************************************************************
DCL56 BIOS Release Notes                                             01/16/2004

*Version   : V0.03.00
*File name : CL56203A.ROM (V0.03.00)
*Checksum  : E54B

Fixed/Modification:
	SYS:
	1.Base on cl32 add ABO function.

	EC:
	1.The same as V0.02.

*******************************************************************************
DCL56 BIOS Release Notes                                             01/12/2004

*Version   : V0.02.00
*File name : CL56202A.ROM (V0.02.00)
*Checksum  : 6713
*File name : CL56202B.ROM (V0.02.00)
*Checksum  : 6A4D

Fixed/Modification:
	SYS:

	EC:
	1.Modify battery low and critical low condition.
	2.Modify W/L LED test function.


*******************************************************************************
DCL56 BIOS Release Notes                                             01/08/2004

*Version   : V0.02.T01
*File name : CL56202A.t01 (V0.02.T01)
*Checksum  : 7BAB
*File name : CL56202B.t01 (V0.02.T01)
*Checksum  : 7EE5

Fixed/Modification:
        SYS:
	1.>Fix DOS mode touch pan can't working for ENE Keyboard.
	2.>Add Intel 802.11b+g wireless LAN card.


        EC:
 	1.Modify power_on_pin_init(), Gpio_Reg_Init() function and EC_ON pin initial value.
	2.Modify Service_Timer0() function.
	3.Modify Anykeywakeup by adding command 0x45 data 0xAF.
	4.Modify Critical Low suspend.
	5.Modify temperature and actions for battery.
	6.Re-boot after flash BIOS.
	7.Modify Bluetooth function.
	8.Modify LidSwithch function.
	9.It will auto wake up from S3 if battery capacity is under 5% on S3 mode.
	10.Modify the behavior of Battery LED.

*******************************************************************************
DCL56 BIOS Release Notes                                             01/05/2004

*Version   : V0.01
*File name : CL56201A.ROM (V0.01)
*Checksum  : 8DA7
*File name : CL56201B.ROM (V0.01)
*Checksum  : 90E1

Fixed/Modification:
        SYS:
        EC:
        1.> First release for DBL10 M/B.

Note:
        1.> None.

